Friction shim FAQ

Frequently asked questions

Answers to the questions engineers most often ask about MICROLOCK friction shims, the microspike technology, quality control and how we work with customers.

Technology and performance

Is it really correct that you can achieve a coefficient of friction of 1.0 and even above?

Yes. It may seem unrealistic, yet the technology really offers mindblowing properties beyond normal friction shims.

How does the MICROLOCK technology work?

Tough and hard microscopic spikes in the MICROLOCK surface embed themselves into the counterpart and create a micromechanical locking mechanism that eliminates radial movement. Read more in Tech Insights.

Why do MICROLOCK shims have a higher coefficient of static friction than other friction shims?

The secret lies in the microspike distribution and optimized orientation. Other friction shims rely on randomly distributed hard particles with a statistical performance. We can, more densely and more controlled, arrange the interlocking units (microspikes) over the surface area and optimize in terms of microspikes/area.

Does MICROLOCK require a minimum contact pressure to function?

In principle no. The microscopic size of the spikes ensures that you will always have embedding of the spikes into the counterpart. We have steel applications with as little as 5 N/mm2 in nominal contact pressure and we are able to customize the spike microgeometry to specific applications and contact pressures.

Is the MICROLOCK surface sensitive to grease and lubricants?

No. In sharp contrast to joints that rely on classical friction, MICROLOCK is insensitive to lubricants and grease. This is a huge benefit when dealing with slip-critical joints that rely on the friction between the mating parts. With MICROLOCK, you completely eliminate sensitivity to greasy/wet assemblies.

What is the maximum service temperature of the shims and the MICROLOCK finish?

650 ºC.

Materials and handling

What counterpart materials does MICROLOCK work on?

From hardened steel to soft polymers. The only requirement is that the counterpart is softer than the MICROLOCK surface hardness. MICROLOCK has a hardness of ca. 2000 HV, which is three times harder than hardened tool steels.

What types of base material do you use for the shims?

Steel and stainless steel. Your choice.

Are the MICROLOCK discs and shims re-usable?

Yes, the MICROLOCK surface is extremely robust. The microspikes are not damaged or permanently imprinted in the counterpart surface when subjected to even immense surface pressure.

Do you need protective gloves to handle MICROLOCK parts?

No. There are no sharp edges on the parts and they can be handled with bare hands. Furthermore, the surface is insensitive to wet/moist hands.

Are there any loose particles on the MICROLOCK surface?

No. The ceramic microspikes are an integrated part of the steel surface.

Quality and validation

How do you ensure a consistent performance?

The microspikes are arranged in a tightly organized and controlled manner in the surface. Consistency in the microspike geometry, size, shape and distribution is key to optimal performance.

How do you quality control your parts?

We ensure and control the quality by measuring the microspikes in the surface with optical microscopy. The friction performance is directly linked to the geometrical features of the microspikes. So just as in regular quality control of mechanical parts, we measure and control MICROLOCK according to technical drawings. We just do it in micrometer scale instead of millimeters. Read more in Tech Insights.

How do you evaluate friction performance?

We both simulate, calculate and test our friction performance against specific material combinations. When testing, we determine the maximum shear force that can be withstood at different nominal contact pressures. Typically, we translate these data into a “friction vs. contact pressure” diagram that displays the slip coefficient of static friction as a function of pressure. The friction performance is directly linked to the microspike geometry and counterpart materials.

Our applications are highly critical. Can we trust the performance of MICROLOCK?

Yes. We deliver parts to extremely critical, high risk applications within wind turbines, engines and the space industry. We are the only company that can make direct, non-destructive quality control of each and every friction shim. Our approach to performance is data-driven and based on proven mechanics.

What management certifications do you have?

ISO 9001, ISO 14001 and ISO 45001. We commit to the highest product quality, environmental responsibility and providing a safe workplace for our employees.

Is MICROLOCK produced in a sustainable way?

Yes. The technology is designed for the future with complete REACH and RoHS compliance, no use of nickel coatings or synthetic diamonds, and no use of critical materials. Our production consumables are even re-usable.

Working with MICROLOCK

What kind of applications do you deliver to?

From tiny electronic equipment to heavy machinery such as large, industrial shafts and flanges. From clean-room environments to harsh outdoor applications.

Can you help us develop new mechanical solutions?

Yes. This is a great part of our customer collaborations. We develop new solutions at both microscale (new MICROLOCK configurations) and macroscale (part design). We use CAD and FEA to evaluate and analyse the effects on the mechanical system with new friction shims and test it out in real life. Read more in Tech Insights.

What is your typical lead time for custom shims?

3 to 4 weeks. In urgent cases, we can even deliver within 1 to 2 weeks.

Do you also make prototypes?

Yes. We produce both single parts for prototyping and thousands in serial production.

Did not find your answer?

Ask the engineers behind MICROLOCK.

Tell us about your application, materials and load case, and we will get back to you with a qualified answer.